Všetky kategórie
Vysokorýchlostný fotodetektor

Vysokorýchlostný fotodetektor

Domov> Produkty > Vysokorýchlostný fotodetektor

未命名-1
未命名-1

LK-HSPD-Ku-CM Vysokorýchlostný InGaAs fotodetektor


  • Wide Bandwidth,High Speed
  • Zabudované Bias-T
  • AC spojený
  • Hermetically Sealed, SMA Connector
  • Low Dark Current,high signal-to-noise ratio.
  • Malý tvarový faktor.
Popis produktu

LK-HSPD-Ku-CM high-speed detector module is a sophisticated optoelectronic transceiver, meticulously engineered to cater to both digital and analog signal processing applications. This module is equipped with an InGaAs PIN photodiode, which boasts a spectral response range from 1250 to 1650 nanometers, inclusive of the essential matching electronics required for optimal signal alignment and conditioning.

LK-HSPD-Ku-CM is capable of delivering a bandwidth of 18 gigahertz, making it well-suited for high-speed data communications. The module is powered by a +5-volt supply, ensuring reliable operation and ease of integration with existing power systems. It adheres to the standards for single-mode 9/125-micrometer fiber inputs, facilitating compatibility with established fiber optic infrastructure. The Radio Frequency (RF) output is equipped with an SMA-compatible connector, which is meticulously impedance-matched to 50 ohms to ensure efficient signal propagation and minimal reflection.

LK-HSPD-Ku-CM is constructed with a hermetic sealing process, which provides robust environmental protection and enhances the module's resilience against moisture, dust, and other potential contaminants, thereby ensuring long-term stability and performance.

Technické špecifikácie
Typické a absolútne maximálne hodnotenie
Parameter Sym. Typ hodnotenie Jednotka
Rozsah teploty skladovania TSTG -45 ~ +85 -55 ~ +100
Rozsah prevádzkových teplôt krytu TC 25 -40 ~ +85
Predpätie VR 5 -4.75 ~ +5.25 V
Optický vstupný výkon Pin + 10 + 13 dBm
Optický výkon pri vyhorení PB - + 16 dBm
Teplota spájkovania olov Tp 280 (10 s) 330 (10 s)
Electrical / Optical Characteristics ( TC = 22 ± 3 ℃ )
Parameter sym Skúšobný stav Hodnoty parametrov Jednotka
Rozsah vlnových dĺžok λ - 1000 1650 ~ nm
Frekvenčný rozsah - - ku pásmo -
Malá šírka pásma signálu f-3dB TC= 22 ± 3 ℃ 0.1 18 ~ GHz
responsivity Re VR, Pin= 1 mW λ = 1310nm ≥ 0.75 A / W
      λ = 1550nm ≥ 0.7  
Plochosť amplitúdy A TC = -40~+85 ℃ ≤ ±1.5 dB
Výstup VSWR PSV - ≤ 2.5 -
Predpätie VR - +5 V
RF konektor - - SMA -
Saturačný optický výkon Ps VR, λ = 1550nm
Modulovaný striedavý prúd
+ 13 dBm
Temný prúd Id VR ≤ 10 nA
Saturation RF Output Power Špúliť ústa - -10 dBm
Výstupná impedancia RL - 50 Ω

● Typické krivky odozvy

(VR, λ=1550nm, TC =25 ºC, Pin=0dBm)

(Fig. 1 Ku-Band Photodetector Frequency Response)

● Dimension and Pins ( Unit: mm[ inch] )

RF Connector: SMA

Remark: this is rev 1.1, Compared to the version sent to the customer on April 14, 2023, the overall dimensions have changed except for the tail fiber.

● Informácie o objednávke

Hárok 1:

kód  Analógová šírka pásma
Ku 0.1 ~ 18 GHz

Hárok 2:

kód Poznámka
CM Na mieru

Hárok 3:

kód Typ konektora Poznámka
N No Connector Single-mode 9/125 μm fiber pigtail
A FC / APC
P FC/PC

● Bezpečnostné opatrenia

  • The fiber bending radius no less than 20mm for avoiding fiber damaged.

  • Be sure the fiber coupling facet is clean before connecting it to opto-circuit.

  • The suitable ESD protection is required in storage, transportation and using.

Všetky naše štandardné fotodetektory je možné prispôsobiť do modulov!

použitie
  • Optical-fiber Communication

  • Spracovanie radarových informácií

  • Elektronické vojny

  • High-speed Signal Test and Measurement

  • Bezpečnosť a dohľad

OTÁZKA